Tripp Lite SNMPWEBCARD UPS Remote Monitoring and control via SNMP, Web, or TelnetTripp Lite SNMPWEBCARD UPS Remote Monitoring and control via SNMP, Web, or Telnet Product Description:
Tripp Lite's SNMPWEBCARD allows network users to operate any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS as a managed device on the network. It enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a web browser. This unit provides remote viewing of site electrical data, UPS status information and self-test logs. It also supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. The optional EnviroSense module (sold separately) provides remote temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom devices.
- Internal SNMP/Web management accessory card with simple installation and setup
- Makes any slot-equipped Tripp Lite UPS a managed device on the network, controllable using SNMP network management platforms or a web browser
- DHCP or Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned via permanent IP addresses
- 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network
- 2-year warranty
- Makes any slot-equipped Tripp Lite UPS a managed device on the network
- NEW firmware web-only version 12.06.0060 now available - supports IPv6. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier. NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the 12.04.0055 firmware to provide SNMPv3 support, then to 12.06.0060 for IPv6 support
- Provides a variety of advanced network management tools
- Supports multiple protocols Tripp Lite's PowerAlert Network Management System
